MEASURES AND LEVELS::
METAL DETECTOR

• Set the control knob to the INITIAL SETTING ( ) position. The detector is now operating in the
• TRASH ELIMINATION MODE. To operate the TRASH ELIMINATION MODE and eliminate
• junk targets, adjust the Elimination Control to the desired level for foil, nails, bottlecaps, or
• pulltabs to be eliminated.
• Scan the searchcoil at about one to two feet per second. Maintain a one or two-inch
• searchcoil height above and level to the ground. All accepted metal targets produce an audio
• sound when the targets are below the coil. Dig all targets that produce an audio signal.